2023 Yanmar V Series V8

Information

2023 Yanmar V Series V8

Photos

Highlights

  • Bartlesville, Oklahoma
  • 2023
  • Yanmar
  • V Series V8
  • Model: TCD 2.9 L4
  • 14 V / 95 A
  • Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics, automatic optimisation and adjustment of drawbar pull and speed. Hydraulic motor power shift providing two speed ranges. Infinitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear axle via cardan shaft to front axle. Inching pedal for sensitive driving and stopping at high rpm.
  • Turbo diesel
  • Available
  • Total: 6' 1" (1,850 mm) | of fork carrier: 4' 1" (1,240 mm)
  • Total (top of cab): 8' 8" (2,640 mm)

Specifications

  • 2023
  • Yanmar
  • V Series
  • V8
  • Compact
  • Model: TCD 2.9 L4
  • 4-stroke
  • Deutz
  • Net rating at 2,200 rpm (SAE J 1349): 60 hp (45 kW)
  • Max: 177 lb ft (240 Nm) @ 1,600 rpm
  • 177 in3 (2,900 cm3 )
  • Intercooler, Water
  • 4 in line
  • gas optimised
  • EPA Tier 4 Final / EC stage III B
  • 12 V / 3.5 hp (2.6 kW) | Cold-starting aid: Glow plugs
  • Common Rail
  • Turbo diesel
  • Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics, automatic optimisation and adjustment of drawbar pull and speed. Hydraulic motor power shift providing two speed ranges. Infinitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear axle via cardan shaft to front axle. Inching pedal for sensitive driving and stopping at high rpm.
  • Articulated, 1 steering cylinder with final positioning damping on both sides, fully hydraulic through Load-Sensing priority valve, quick and easy steering even at engine idle-running speed.
  • Low: 0-3 / 0-6 mph (0-5 / 0-10 kph) | High: 0-10 / 0-22 mph (0-16 / 0-36 kph)
  • Service: Hydraulically actuated center-mounted disc brake, acting on all 4 wheels via 4-wheel drive | Auxiliary: Hydrostatic drive provides dynamic braking
  • Mechanically actuated center-mounted disc brake on front axle
  • 405/70 R 18 SPT 9 Dunlop
  • 405/70 R 18 SPT 9 Dunlop
  • 12 V / 100 Ah
  • Nominal voltage: 12 V
  • 14 V / 95 A
  • Breakout force at bucket edge (SAE J 732): 10,318 lbs (45,900 N)
  • Cab exterior: 101 dB (A) | Cab interior: 75 dB (A)
  • Max: 17 gpm (64 l/min)
  • Max Working: 3,625 psi (250 bar)
  • Load center from fork attachment point: 22" (560 mm)
  • Total (top of cab): 8' 8" (2,640 mm)
  • Total, bucket on ground: 16' 7" (5,060 mm) | fork tines 4" x 1.8" (100 mm x 45 mm): 3' 7" (1,100 mm)
  • Total: 6' 1" (1,850 mm) | of fork carrier: 4' 1" (1,240 mm)
  • at outside bucket edge: 13' 8" (4,160 mm)
  • 6' 11" (2,100 mm)
  • General-purpose bucket (SAE J 742): 1.05 yd3 (0.80 m3 )
  • Tank: 20 gal (75 l)
  • at ground level (SAE J 732): 10,800 lbs (48,000 N)
  • 15 gal (55 l)
  • Tipping, straight at full reach (ISO 14397-1): 8,311 lbs (3,770 kg) | Tipping, articulated at full reach (ISO 14397-1): 7,341 lbs (3,330 kg) | Operating load (SAE J 1197) over the total lift and steering range: 2,945 lbs (1,335 kg) | Operating load in transport position, above ground level, total steering range: 5,512 lbs (2,500 kg)
  • (SAE J 1197): 10,802 lbs (4,900 kg)
  • system in compliance with US/ISO standards, H7 headlamps
  • Axles: Rigid front axle with 35% limited slip differential. Oscillating rear axle with 35% limited slip differential. Center-mounted disc brake. | Stability factor: 2